Aluma-Hyde® Ii Brownells

Aluma-Hyde® Ii Brownells Reviews : You finding where to buy Aluma-Hyde® Ii Brownells for cheap best price. Get Cheap at best online store now!!
 
Content:

Aluma-Hyde® Ii Brownells.

$12.99 - $13.99
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other ...

Product Description

Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents

The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts.

Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.


1911, Issue:04, Page:062
AR-15, Issue:04, Page:077
Big Book Catalog, Issue:71, Page:400

SPECS: 12 oz. (340 g) aerosol can.

Oxpho-Blue® Brownells.

$10.99 - $44.99
Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because ...

Product Description

Finest Professional Cold Blue On The Market-Period!

Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because of its ease of application and remarkably superior results - has become a favorite of the professional gunsmith as well. With Oxpho-Blue, all you need do in most cases, is dampen a piece of cotton flannel and give the area a good rubbing. The chemical goes through the oil on the gun, removes thin rust and blues the steel underneath. No after-rust. For looks, the final finish was not intended to approach the beauty of the well-polished, hot-blued gun. It has developed, however, that in the hands of a careful craftsman, not only is the Oxpho-Blue finish beautiful, but it is also more durable and weather resistant than any other known chemical finish.

Oxpho-Blue has other outstanding features worthy of note:

  1. Absolutely no after-rust.
  2. Phosphate-like surface forms under the blue.
  3. Rust removing qualities of the solution, making it unnecessary to remove mild rust in the usual manner.
  4. "Wetting" characteristics of the solution, giving it the ability to penetrate oil, dirt, etc., on the surface of the gun; blue the metal underneath; remove rust and dirt; leave the gun blued and ready for oiling.
  5. Beauty and high durability of the finish: vigorous rubbing with No. 0 steel wool is one of our favorite application methods - the more rubbing, the more brilliant it comes and, since abrasion is part of the process, normal contact from gun cases, brush and clothing won't wear your bluing.
    (Note: It is possible to get a surface so dense with Oxpho-Blue that water will puddle on it!)
  6. For Neighbor Kid and Mr. Average Sportsman, a beat-up gun can be made to look quite presentable by following this recent application technique; dampen a shoe shine cloth with Oxpho-Blue and blue the gun with a shoe shine motion - without taking too much trouble to remove old dirt, grease, rust, etc. This particular gimmick actually obsoletes all other kinds of bluing for retail sale, for any youngster can make his old man's gun look quite presentable. For gun club members, neighborhood shooters, etc., one bottle takes care of the lot. (The rub-on features works wonders on tools and instruments which have been blackened and show bright along the edges: just dampen a cloth with Oxpho-Blue, rub the bright areas briskly and they are as black as before, but tougher.)


Big Book Catalog, Issue:71, Page:396

SPECS: 4 fl. oz. (118ml),  or 32 fl. oz.